STATE OF CONNECTICUT EXECUTIVE BRANCH JOBS

Qualified Craft Worker (Plumbing and Steamfitting) (40 Hour)

Recruitment #240814-6827FM-001

Go Back Apply View Benefits

Introduction

The State of Connecticut Department of Transportation (DOT) Office of Property and Facilities Services, seeks a qualified individual for the position of Qualified Craft Worker (Plumbing and Steamfitting) at the Region 2 office in East Lyme.


WHAT WE CAN OFFER YOU:

POSITION HIGHLIGHTS:
  • Full-time (40 hours per week)
  • First shift, 7:30 am - 4:00 pm
  • Monday - Friday
  • Office/On-site
  • Location: East Lyme, CT
THE ROLE:
The Qualified Craft Worker will spend most of the time performing highly skilled plumbing/steamfitting tasks involving the fabrication, installation, maintenance, and repair of various interior and exterior plumbing related building components including, but not limited to:
  • Domestic, sanitary, and drainage utilities, and garage floor drainage systems
  • Fixtures and water heaters
  • Line snaking/jetting, well water systems, oil/water and wastewater holding equipment, natural gas supply lines, pneumatic compressors, and associated plumbing
  • Diagnosing/troubleshooting and resolving plumbing problems typical to commercial and industrial buildings

The incumbent must be dependable and self-motivated since they will often be working independently, however, work with other trades as required in the repair and maintenance of HVAC and fuel dispensing equipment. The ability to multi-task and to take initiative in completing their duties with minimum supervision is necessary. The incumbent must be dependable and self-motivated since they will often be working independently.

*A considerable amount of driving is involved and the individual filling this position is required to maintain a valid Connecticut driver’s license.

WHO WE ARE:
About Us: As one of Connecticut’s largest State agencies, DOT employs approximately 3,200 individuals statewide in five distinct bureaus. It is our mission to provide a safe, accessible and efficient multimodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. We have a significant transportation infrastructure system that is essential to maintaining mobility for Connecticut residents and businesses and supporting economic and community development while preserving environmental and cultural resources. The Department of Transportation is committed to cultivating a diverse staff that is representative of the communities we serve. Applications from individuals having diverse backgrounds and life experiences are strongly encouraged.

Selection Plan

To Apply:
  • In order to be considered for this job opening you must meet the Minimum Qualifications as listed on the job opening.  You must specify your qualifications on your application.
  • The minimum experience and training requirements must be met by the close date on the job opening, unless otherwise specified.
  • In order to receive educational credits toward qualification for this job posting, the institution must be accredited.  If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the individual listed on this job posting. 
  • Ensure that your application is complete and detailed before submitting it. In order to comply with Public Act 21-69, the State of Connecticut is no longer asking for resumes during the initial application process. You will not be able to make revisions once your application is submitted into the JobAps system.
  • Please select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.
  • All application materials must be received by the recruiting agency by the time specified on the job opening for the position for which you are applying. Late applications may not be submitted and will not be considered. Exceptions are rare and limited to documented events that incapacitate a candidate during the entire duration of the job posting time period. It is the candidate’s obligation and responsibility to request an exception and provide a legally recognized justification to accommodate such exception. Requests should be made to DAS.SHRM@ct.gov.
  • For current state employees, salary calculations are not necessarily comparable from three branches of state government (i.e., Executive, Legislative, Judicial) to the other.  
FOR ASSISTANCE IN APPLYING:
  • Please read or watch our Applicant Tips on How to Apply!
Important Information After You Apply:
  • This posting may require completion of additional referral questions (RQs). You can access these RQs via an email that will be sent to you after the posting's closing date or by visiting your JobAps Personal Status Board (Certification Questionnaires section). Your responses to these RQs must be submitted by the questionnaire's expiration date. Please regularly check your email and JobAps Personal Status Board for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam.
  • Read through this helpful link to prepare for your interview. 
  • Although applicants will receive correspondence via email, as a backup they are also encouraged to sign on to their Personal Status Board on a daily basis to monitor their status, view all emailed notices and complete tasks required in the recruitment process.
  • Note: At any point during the recruitment process, applicants may be required to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring agency.
  • Interviews will be limited to candidates whose experience and training most closely meet the requirements of the position.
  • The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class in the next twelve (12) months.
  • Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State Employees which is available at www.ct.gov/ethics.
Connect With Us:
Due to the large volume of applications received, we are unable to provide confirmation of receipt or status during the recruitment process. Updates will be available through your JobAps portal account. Should you have any questions pertaining to this recruitment, please contact Sharon McIntosh, at Sharon.McIntosh@ct.gov.

Follow the State of Connecticut on LinkedIn.

PURPOSE OF JOB CLASS (NATURE OF WORK)

In a state agency, this class is accountable for performing a full range of highly skilled duties in one of the following trade areas: electrical, plumbing and steamfitting, utilities or heating, ventilation and refrigeration.

EXAMPLES OF DUTIES

Performs highly skilled maintenance and/or construction work requiring application of trade skills, codes and standard trade practices in electrical, plumbing, utilities, or HVACR trade areas; makes estimates of time, personnel and determines and obtains required materials; keeps necessary records; may perform duties related to similar trade areas as required; may act as liaison with other operating units and outside contacts; may operate heavy equipment; may respond to fire and/or crash emergency situations at state owned airports; performs related duties as required.

AUTOMOTIVE AND MECHANICAL EQUIPMENT: Diagnoses failure in all types of automotive and heavy mobile equipment; services, dismantles, overhauls and reassembles front ends, engines, standard and automatic transmissions, rear ends, hydraulic systems and automotive electrical systems; constructs and repairs any needed parts; welds or brazes parts by oxyacetylene torch or electric welding; may operate testing equipment required to diagnose automotive electronic components.

ELECTRICAL: Performs highly skilled tasks in accordance with national and local codes and standard trade practices; lays out and installs electrical conduit for power and lighting; makes repairs to electrical motors, controllers, switchboard panels, traffic lights, lights, power circuits, ventilating fans, electronic counting and traffic control devices, intercommunication systems and electrical generators; installs open and concealed wiring and lighting fixtures; maintains and repairs unit heaters, fans, building maintenance machines and equipment, gas pumps, refrigeration units, diesel electric generators, movable bridges, fire alarm systems, etc.; repairs relays and switches; rewires motors; bends pipes; installs, repairs and maintains oil burners; performs necessary safety testing of electrical equipment and keeps required records; performs pole work; may diagnose failures and repair drilling and patching to facilitate installations; may assist in high voltage work.

HVACR: Performs highly skilled tasks in accordance with standard trade practices and codes on air systems used in heating, ventilating and refrigeration; operates, maintains, repairs, installs, modifies and assembles air conditioning and refrigeration equipment and systems which may use Freon or chilled water for air cooling means and air or water for condenser means; determines required cooling capacity of units needed for small areas; uses and interprets a psychometric chart; controls and measures air flow, room air changes and room pressurizing; monitors computerized control systems; performs minor tests for fuel specific gravity and gas leaks; adds water treatment chemicals to boilers; may install, modify, repair and assemble electrical or pneumatic controls for this type of equipment; may inspect and repair steam traps fed by main system at various locations; may remove pipe insulation materials associated with repair of pipes and fittings using OSHA approved methods.

LOCKSMITH: Maintains, repairs and installs locking, mechanical and electronic door closing equipment; makes new or duplicate keys and changes lock combinations using hand tools and special equipment; disassembles locks and repairs or replaces worn tumblers, springs and other parts; rebuilds cylinders; sets up and maintains key control and issuing system.

PLUMBING AND STEAMFITTING: Performs highly skilled plumbing and steamfitting tasks in accordance with standard trade practices; assembles, installs and repairs air, gas, water, steam and sewer disposal systems; cuts, bends, reams and threads pipes; caulks and tests joints; installs and repairs gas, water, steam and sanitary fixtures; covers and insulates tanks, pipes and related objects; works with high pressure hot water and steam systems; performs minor tests for fuel specific gravity and gas leaks; adds water treatment chemicals to boilers; may braze pipes; may inspect and repair steam traps and/or vaults fed by main system at various locations; may remove pipe insulation materials associated with the repair of pipes and fittings using OSHA approved methods; may inspect and repair medical gas systems.

UNIVERSITY OF CONNECTICUT, Storrs:
UTILITIES : Performs highly skilled tasks in accordance with standard trade practices and codes on water mains, sewer lines, manholes, catch basins, high pressure steam distribution, chilled water distribution and storm water systems; disassembles, cleans, overhauls and rebuilds motors, valves, pumps, filters and other pumping station equipment; cuts, shapes, drills and welds flat or metal pipe to fabricate for use in water and steam distribution systems; inspects and repairs steam traps and/or vaults fed by main system at various locations; operates heavy equipment such as excavators, dump trucks, backhoes, pipe saws, chain saws, jackhammers and various hand tools; cleans sewer lift station wet wells of grease and debris as needed; digs trenches, constructs trench boxes and removes pipe insulation materials associated with the repair of pipes and fittings using OSHA approved methods.

KNOWLEDGE, SKILL AND ABILITY

Considerable knowledge of and ability to apply standard tools, materials, methods and practices of the particular trade; interpersonal skills; oral and written communication skills; ability to prepare estimates and keep shop records; some ability to utilize computer software.

MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE

Four (4) years of experience in the particular trade area indicated by the parenthetical title.

MINIMUM QUALIFICATIONS - SPECIAL EXPERIENCE

Two (2) years of the General Experience must have been performing skilled trade functions in the specific trade area.
Note: For State Employees, this is interpreted at the level of Skilled Maintainer or Transportation Maintainer 2.

MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED

1. Graduation from a vocational or technical school with a diploma designating completion of subject requirements in a maintenance trade area may be substituted for two (2) years of the General Experience.
2. Two (2) years of experience as a Qualified Craft Worker Intern in a designated maintenance trade area may be substituted for the General and Special Experience.
3. Experience performing technical duties within a designated maintenance trade area on a military base, aircraft carrier or large compound may be substituted for the General and Special Experience on a year for year basis.

PREFERRED QUALIFICATIONS

  • Possession of a valid CT plumbing and/or trade-related license
  • Experience with CT plumbing and relative building and safety codes, including lock-out/tag-out procedures and “Call Before You Dig” permitting
  • Experience reading and performing work as detailed in architectural, manufacturer, and engineering drawings and specifications
  • Experience providing drawings and specifications sufficient for working with other trades
  • Experience in the operation and maintenance of building automation systems sufficient to access, troubleshoot, and repair them
  • Experience with well systems and sewage lift stations
  • Experience with Microsoft Office software including Outlook, Excel, and Word

SPECIAL REQUIREMENTS

1. Incumbents in this class may be required by the appointing authority to possess and retain appropriate current licenses, permits and/or certifications including possession and retention of an Unlimited Journeyperson's license in the trade area indicated by the parenthetical title.
2. Incumbents in this class may be required to possess and retain specific education and/or experience to meet various certification requirements.

CHARACTER REQUIREMENTS

At State Airports: In addition to the checking of references and of facts stated in the application, a thorough background investigation of each candidate may be made before persons are certified for appointment.

PHYSICAL REQUIREMENTS

1. Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity and must maintain such physical fitness as to be able to perform the duties of the class.
2. A physical examination may be required.

WORKING CONDITIONS

1. Incumbents in this class may be required to lift moderate to heavy weights and to use protective equipment such as respirators and safety goggles; and may be exposed to risk of injury from equipment, extreme weather conditions and/or environmental conditions.
2. The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles.

Conclusion

AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER

The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities.



Click on a link below to apply for this position:

Fill out the Supplemental Questionnaire and Application NOW using the Internet.


E-mailPhone: (860) 713-52058am - 4:30pm M-FPowered by JobAps